After you have finished wiring your RingPatrol device to your transformer and doorbell wiring, the next step is to turn power back on.  Simply flip the breaker that you turned off in the beginning of the installation procedure back to the "on" position. If you didn't turn off power, then you can skip this step.

When RingPatrol is powering back up, you may see the the green and blue LED's flashing.  This is normal while it is powering on.  The green LED will then turn on solid and the blue LED will continue to flash.  The flashing blue LED indicates that your RingPatrol device is not connected to your home network.  This is ok as you will connect it to your network in the next step.